USB Sundkarte + USB HUB Probleme

Das Forum fĂĽr den Linux-Pinguin - auch andere Unix-Derivate (*BSD, (Open)Solaris, Apple's Darwin / MacOS X, ...) sind hier willkommen!
Forumsregeln
Das Forum fĂĽr den Linux-Pinguin - auch andere Unix-Derivate (*BSD, (Open)Solaris, Apple's Darwin / MacOS X, ...) sind hier willkommen!

USB Sundkarte + USB HUB Probleme

Beitragvon gendelider » Sa 21 Jul, 2012 09:45

HW: MacBook 2,1 (auch auf desktop reproduzierbar)
Sys: Ubuntu 10.10, updated.

Vorgeschichte: ich hatte eine USB Sounkarte gehabt, es funktionierte Alles tadellos vor halbes Jahr. Ich habe die leider verloren, ich habe etwas ähnliches bei Conrad gekauft.

Problem kommt, wenn ich diese Soundkarte durch gewissen Typ von USB HUB anschließe. Ich erkläre Durch einige Bilder bzw lsusb -t output.

Bild1:
bild1.JPG
bild1.JPG (29.63 KiB) 25794-mal betrachtet
Soundkarte direkt zum MacBook angeschlossen, funktioniert.
Code: Alles auswählen
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 3, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
    |__ Port 1: Dev 3, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
    |__ Port 1: Dev 3, If 2, Class=app., Driver=, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 7, If 0, Class=audio, Driver=snd-usb-audio, 12M
    |__ Port 1: Dev 7, If 1, Class=audio, Driver=snd-usb-audio, 12M
    |__ Port 1: Dev 7, If 2, Class=audio, Driver=snd-usb-audio, 12M
    |__ Port 1: Dev 7, If 3, Class=HID, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 0, Class=HID, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 1, Class=HID, Driver=appletouch, 12M
    |__ Port 2: Dev 2, If 2, Class=HID, Driver=usbhid, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M
    |__ Port 4: Dev 3, If 0, Class=vend., Driver=isight_firmware, 480M



Bild2:
bild2.JPG
bild2.JPG (43.14 KiB) 25794-mal betrachtet
Wenn ich die Soundkarte durch diesen USB HUB anschlieĂźe, (ID=05e3:0608)in /var/log/syslog bekomme ich: "cannot submit datapipe for urb 0, error -28: not enough bandwidth", und funktioniert Mikrofon-teil nicht.
Code: Alles auswählen
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 3, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
    |__ Port 1: Dev 3, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
    |__ Port 1: Dev 3, If 2, Class=app., Driver=, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=HID, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 1, Class=HID, Driver=appletouch, 12M
    |__ Port 2: Dev 2, If 2, Class=HID, Driver=usbhid, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M
    |__ Port 1: Dev 12, If 0, Class=hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 13, If 0, Class=audio, Driver=snd-usb-audio, 12M
        |__ Port 1: Dev 13, If 1, Class=audio, Driver=snd-usb-audio, 12M
        |__ Port 1: Dev 13, If 2, Class=audio, Driver=snd-usb-audio, 12M
        |__ Port 1: Dev 13, If 3, Class=HID, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 0, Class=vend., Driver=isight_firmware, 480M



Bild3:
bild3.JPG
bild3.JPG (40.92 KiB) 25794-mal betrachtet
Wenn ich die Soundkarte durch diesen USB HUB anschlieĂźe, (ID=05e3:0606 - letzte Ziffer anderes) keine Fehlermeldung und funktioniert alles.
Code: Alles auswählen
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 3, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
    |__ Port 1: Dev 3, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
    |__ Port 1: Dev 3, If 2, Class=app., Driver=, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 8, If 0, Class=hub, Driver=hub/4p, 12M
        |__ Port 3: Dev 9, If 0, Class=audio, Driver=snd-usb-audio, 12M
        |__ Port 3: Dev 9, If 1, Class=audio, Driver=snd-usb-audio, 12M
        |__ Port 3: Dev 9, If 2, Class=audio, Driver=snd-usb-audio, 12M
        |__ Port 3: Dev 9, If 3, Class=HID, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 0, Class=HID, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 1, Class=HID, Driver=appletouch, 12M
    |__ Port 2: Dev 2, If 2, Class=HID, Driver=usbhid, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M
    |__ Port 4: Dev 3, If 0, Class=vend., Driver=isight_firmware, 480M


Fortsetzung kommt in nächstem post.
gendelider
Junior Board-Mitglied
Junior Board-Mitglied
 
Beiträge: 30
Registriert: Sa 30 Apr, 2005 04:57
Wohnort: Wien

Re: USB Sundkarte + USB HUB Probleme

Beitragvon gendelider » Sa 21 Jul, 2012 09:50

Bild4:
bild4.JPG
bild4.JPG (47.1 KiB) 25792-mal betrachtet
Wenn ich so kaskadiere USB HUBS, funktioniert auch alles!!! In diesen Fall dĂĽrfte Bandbreite stimmen! Aber warum?
Code: Alles auswählen
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 3, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
    |__ Port 1: Dev 3, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
    |__ Port 1: Dev 3, If 2, Class=app., Driver=, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 10, If 0, Class=hub, Driver=hub/4p, 12M
        |__ Port 3: Dev 11, If 0, Class=hub, Driver=hub/4p, 12M
            |__ Port 4: Dev 12, If 0, Class=audio, Driver=snd-usb-audio, 12M
            |__ Port 4: Dev 12, If 1, Class=audio, Driver=snd-usb-audio, 12M
            |__ Port 4: Dev 12, If 2, Class=audio, Driver=snd-usb-audio, 12M
            |__ Port 4: Dev 12, If 3, Class=HID, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 0, Class=HID, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 1, Class=HID, Driver=appletouch, 12M
    |__ Port 2: Dev 2, If 2, Class=HID, Driver=usbhid, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M
    |__ Port 4: Dev 3, If 0, Class=vend., Driver=isight_firmware, 480M



Bild5:
bild5.JPG
bild5.JPG (36.28 KiB) 25792-mal betrachtet
Fehlermeldung w.o., funktioniert nicht.
Code: Alles auswählen
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 1: Dev 3, If 0, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
    |__ Port 1: Dev 3, If 1, Class='bInterfaceClass 0xe0 not yet handled', Driver=btusb, 12M
    |__ Port 1: Dev 3, If 2, Class=app., Driver=, 12M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=uhci_hcd/2p, 12M
    |__ Port 2: Dev 2, If 0, Class=HID, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 1, Class=HID, Driver=appletouch, 12M
    |__ Port 2: Dev 2, If 2, Class=HID, Driver=usbhid, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/8p, 480M
    |__ Port 4: Dev 3, If 0, Class=vend., Driver=isight_firmware, 480M


Bemerkungen / zusamengefasst:
- ich habe neue Soundkarte aber inzwischen waren mehrere kernel-updates auch.
- ich habe aufgepasst immer den selben Steckkontakt auf mein MacBook zu verwenden.
- ich habe auch andere HUBs (andere fabrikationen) probiert mit ID=05e3:0608, hatten selbe Problem gehabt.
- diese HUBs haben Problem dann, wenn die direkt am Rechner angeschlossen sind, aber keine, wenn kaskadiert sind.
- in funtionierenden Fällen hängt die Soundkarte auf Bus 2, wenn es nicht geht, auf Bus 1. Was ist eigentlich "Bus"? Bisher habe ich gedacht, das ein Anschluss auf dem Rechner gehört immer zu dedizierten Bus.

Wenn jemand lsusb -v braucht, kann ich in anhang einkopieren.

Und:
was kann ich versuchen, tun, damit ich witerhin diese (Bild2) HUB verwenden kann?
gendelider
Junior Board-Mitglied
Junior Board-Mitglied
 
Beiträge: 30
Registriert: Sa 30 Apr, 2005 04:57
Wohnort: Wien


ZurĂĽck zu LINUX & UNIX-DERIVATE

Wer ist online?

Mitglieder in diesem Forum: Bing [Bot] und 32 Gäste