IPCop und SpeedTouch 510

Das Forum rund um Sicherheitsfragen (Antivirus, Firewall, Spamschutz). Diese Forum wird auch von IPCop.at verwendet.
Forumsregeln
Das Forum rund um Sicherheitsfragen (Antivirus, Firewall, Spamschutz). Diese Forum wird auch von IPCop.at

IPCop und SpeedTouch 510

Beitragvon fri » So 15 Jun, 2003 07:15

Hallo habe seit kurzen Adsl-anschluĂź und habe das netzwerkmodem
Thomson SpeedTouch 510 v4 500series
von der PT bekommen.
Mit IPcop bekomme ich aber keine verbindung zusammen obwohl ich glaube das die einstellungen stimmen kann jemand helfen??

cu fri
-------------------------------------------------------
Interface: PPTP

Telephony:
Maximum retries: 10
Idle timeout (mins; 0 to disable): 15 Persistent connection: x
Dial on Demand: x Dial on Demand for DNS: x
Connect on IPCop restart: x ISP requires Carriage Return:

Additional PPTP settings:
Phonebook entry: RELAY_PPP1
Router IP Address: 10.0.0.138

Authentication:
Username:xyz Password: abc
Method: PAP or CHAP Script name:

DNS:
Type: Automatisch
Primary DNS: 195.3.96.67 Secondary DNS: 195.3.96.68
--------------------------------------------------------------------------------------
fri
 

Mir gehts genauso

Beitragvon minitux » Fr 25 Jul, 2003 17:41

Ich habe seit heute , 25 07, auch ein speedtouch 510i bekommen und bringe den IP Cop nicht zum laufen. Hast du schon eine Lösung? das IP-Cop ADSL HOWTO von weiter unten bringt mich auch nicht weiter...
minitux
Neu im Board
Neu im Board
 
Beiträge: 1
Registriert: Fr 25 Jul, 2003 17:37

Beitragvon ptr » Di 18 Nov, 2003 16:40

habe dieses modem - und problem

erhalte zwar eine ip vom isp kann aber nicht ins internet pingen oder sonstwas!!!

wer kann helfen?!?
ptr
Neu im Board
Neu im Board
 
Beiträge: 8
Registriert: Di 18 Nov, 2003 15:17

Re: IPCop und SpeedTouch 510

Beitragvon amiga » Sa 22 Nov, 2003 11:08

quote="fri"

> Dial on Demand: x Dial on Demand for DNS: x

Beides deaktivieren, dann funktioniert es.
amiga
Neu im Board
Neu im Board
 
Beiträge: 10
Registriert: Di 11 Nov, 2003 20:31

Beitragvon amiga » Sa 22 Nov, 2003 11:09

quote="ptr"

> erhalte zwar eine ip vom isp kann aber nicht ins internet pingen oder
> sonstwas!!!

Poste den output von ifconfig.
amiga
Neu im Board
Neu im Board
 
Beiträge: 10
Registriert: Di 11 Nov, 2003 20:31

Beitragvon ptr » Sa 29 Nov, 2003 18:42

Ich hoffe dies ist gemeint - ps: danke
nicht eingewählt

Schnittstellen:
eth0 Link encap:Ethernet HWaddr 00:05:5D:77:4C:62
inet addr:192.168.0.23 Bcast:192.168.0.31 Mask:255.255.255.240
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:706 errors:0 dropped:0 overruns:0 frame:0
TX packets:1117 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:56443 (55.1 Kb) TX bytes:210540 (205.6 Kb)
Interrupt:11 Base address:0xdc00

eth1 Link encap:Ethernet HWaddr 00:05:5D:74:68:91
inet addr:10.0.0.140 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:1260 (1.2 Kb)
Interrupt:10 Base address:0xe000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:17 errors:0 dropped:0 overruns:0 frame:0
TX packets:17 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1224 (1.1 Kb) TX bytes:1224 (1.1 Kb)





Einträge der Routing-Tabelle:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.16 0.0.0.0 255.255.255.240 U 0 0 0 eth0
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
0.0.0.0 10.0.0.138 0.0.0.0 UG 0 0 0 eth1




Einträge der ARP-Tabelle:
Address HWtype HWaddress Flags Mask Iface
192.168.0.20 ether 00:40:45:08:15:06 C eth0
ptr
Neu im Board
Neu im Board
 
Beiträge: 8
Registriert: Di 18 Nov, 2003 15:17

Beitragvon ptr » Sa 29 Nov, 2003 18:48

jetzt mit Verbindung und blinkendem roten "@" lämpchen

eth0 Link encap:Ethernet HWaddr 00:05:5D:77:4C:62
inet addr:192.168.0.23 Bcast:192.168.0.31 Mask:255.255.255.240
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1342 errors:0 dropped:0 overruns:0 frame:0
TX packets:2335 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:98149 (95.8 Kb) TX bytes:360531 (352.0 Kb)
Interrupt:11 Base address:0xdc00

eth1 Link encap:Ethernet HWaddr 00:05:5D:74:68:91
inet addr:10.0.0.140 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:39 errors:0 dropped:0 overruns:0 frame:0
TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2896 (2.8 Kb) TX bytes:3288 (3.2 Kb)
Interrupt:10 Base address:0xe000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:21 errors:0 dropped:0 overruns:0 frame:0
TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1470 (1.4 Kb) TX bytes:1470 (1.4 Kb)

ppp0 Link encap:Point-to-Point Protocol
inet addr:80.121.6.202 P-t-P:172.19.64.38 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:338 (338.0 b) TX bytes:54 (54.0 b)





Einträge der Routing-Tabelle:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
172.19.64.38 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
192.168.0.16 0.0.0.0 255.255.255.240 U 0 0 0 eth0
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
0.0.0.0 10.0.0.138 0.0.0.0 UG 0 0 0 eth1




Einträge der ARP-Tabelle:
Address HWtype HWaddress Flags Mask Iface
192.168.0.20 ether 00:40:45:08:15:06 C eth0
10.0.0.138 ether 00:90:D0:5A:B2:62 C eth1
ptr
Neu im Board
Neu im Board
 
Beiträge: 8
Registriert: Di 18 Nov, 2003 15:17


ZurĂĽck zu ANTIVIRUS & SECURITY

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 79 Gäste