VDSL Router konfigurieren und änderung speichern

Alle technisch orientierten Fragen und Diskussionen rund um Internet-Zugänge via ADSL und xDSL (alle DSL-basierenden Technologien).
Forumsregeln
Alle technisch orientierten Fragen und Diskussionen rund um Internet-Zugänge via ADSL und xDSL (alle DSL-basierenden Technologien).

Diskussionen über Provider (deren Produkte und Dienstleistungen) werden im Bereich PROVIDER geführt.

Re: VDSL Router konfigurieren und änderung speichern

Beitragvon jutta » Mo 04 Aug, 2014 07:13

kleine bemerkung am rande: bei zyxel routern ware es schon immer am besten, die eingebaute firewall auszuschalten. dann haben sie mehr rechenkapazität für ihre sonstige arbeit und laufen um vieles zuverlässiger und stabiler. das betraf in der vergangenheit zumindest alle "kleineren" router, egal ob mit oder ohne modem (3xx, 5xx, 6xx). zywalls sind was anderes.
jutta
Administrator
Administrator
 
Beiträge: 30473
Registriert: Do 15 Apr, 2004 10:48
Wohnort: wien

Re: VDSL Router konfigurieren und änderung speichern

Beitragvon Dirty Dozi » Fr 08 Aug, 2014 11:48

Hallo Zid und Hallöchen Jutta,

vielen Dank für eure Antwort und Bemühung. Sorry das ich erst so spät hier melde! Hab viel um die Ohren und bin auch noch Krank bzw. mir geht's derzeit nicht so gut. Wegen diesen Problem ist zum Glück Taiwan (HQ) direkt eingebunden dran, hab direkten Mail Kontakt mit den Leuden. Wie es aussieht an der Sache dran und sehen ein das auch einige Probleme da gibt.

Kleiner Ausschnitt aus letzten E-Mail:
Dear *Geheim*,
where did you get the VMG8924 device you´ve on your side?
We´ve verified some issues and will try our best to solve it around end-of-september.
Best Regards,
ZyXEL Germany Support


Also muss ich mich bis ende September mit mein alten Router vergnügen aber wie schon schreiben versuchen sie einige fehler darun zu lösen und um beste resultat draus zu zielen wird es um ende september noch dauern. Hoffe sie Fixen einiges nicht nur dies und sind echt dahinter. Ich sehe mal positiv wenn schon direkt mit denn team in taiwan dran bin nehmen die das ernst^^

Also ich halt euch da am laufenden^^ kann sein das nicht nur ich diesen Ding habe :rofl:

LG, Dirty Dozi
Dirty Dozi
Neu im Board
Neu im Board
 
Beiträge: 18
Registriert: Mi 23 Jul, 2014 10:24
Wohnort: Area 52, Location Top Secret

Re: VDSL Router konfigurieren und änderung speichern

Beitragvon zid » Fr 08 Aug, 2014 12:34

immer schön langsam mit der braut, mia san jo net auf da flucht... :D

hallo dozi,

jetzt kurier dich mal aus. :)

>"...Wie es aussieht an der Sache dran und sehen ein das auch einige Probleme da gibt..."
"einige probleme/some issues" sind imo euphemistische umschreibungen der wahren sachlage, aber egal. der zyxel support is, wie früher schon erwähnt, sehr gut. man wird ernstgenommen- wenn man fundiert argumentiert. und nur das zählt.
aktuell auf alle fälle #1 und #2 vom mehrphasenprogramm abarbeiten, mehr kannst du jetzt eh nicht machen.

lg
zid
zid
Board-User Level 3
Board-User Level 3
 
Beiträge: 1080
Registriert: Fr 23 Jun, 2006 09:08
Wohnort: wien

Re: VDSL Router konfigurieren und änderung speichern

Beitragvon Dirty Dozi » Mo 22 Sep, 2014 21:33

Hallo Zid, Jutta und Co :)

Ich bin wieder da, eurer lieblings Nervensäge von Dienst :rotfl:

Sodala, mich hat der Support von ZyXEL angeschrieben bzw. geantwortet. Sie haben ein neue Firmware rausgebracht mit einige Fixes und neue Feature bzw. Möglichkeiten.

Code: Alles auswählen
Modifications in V1.00(AAKL.6)b1

1. Base on V1.00(AAKL.5)C0 to release V1.00(AAKL.6)b1

[
FEATURE ENHANCED
]


1. [CLI]
Support tcpdump in CLI mode
.
2. [Config][SPVD#167] Wireless password is not encrypted in
"confi
guration
-
backupsettings.conf" file.
Condition:
1. Backup configuration file via WebGUI.
2. Check wireless configuration, you can see the wireless password is not encrypted.
3. [CLI]
support CLI to configure static DHCP.
4. [CLI]
CLI support: DDNS
.
5. [CLI]
CLI supp
ort: DHCP option66
.
6. [CLI]
CLI support: User Account
.
7. [Interface Group] Support option 60 criteria in Bridge WAN
.
(interface Group page)
8. [CLI]
CLI support: Wifi 802.11 b/g/n
.
9. [CLI]
CLI support: P
ort
F
orwarding.
10. [CLI]
CLI support: add system log and security
log
11. [CLI] CLI support: add top command for admin
level
account.
12. [CLI] CLI support: add interface group command for admin level account.
13. [CLI] CLI support: add Remote Mgmnt and Trust domain.
14. [SIP]
[ITS ID 140600827] Remove 100rel from SIP Supported message
header.
15. [Phone]
add country code for CROATIA
.
16. [CLI]
Add command to display the default gateway interface.
17. There is no option to select PAP, CHAP or MS
-
CHAP authentication by Web GUI.


[
FEATURE
MODIFIED
]


1. [PCP][SPVD#46]
Cannot modify PCP rule name.
2. [VOIP][IT
S#
140600887
]
ACS Dial Plan via tr69 Errors
.
CPE should converts HTML
Entity back HTML Entity when re
ceived
it via tr069
.
3. [PCP][SPVD# 47]
End
-
user should not need to add PCP MAC address when "Home
Network User" configures as "All".
1. Add PCP rule as "Home
Network User" to "All", click Apply button.
2. WebGUI will pop
-
up error message: "MAC should not be empty".
3. And end
-
user needs to press button "+" to add "00:00:00:00:00:00" in MAC list.
Change:
Change message content for clearer description.
4. [Trust Do
main][ITS#
140701230
]
Auto mapping trust domain configuration from old



style design to new type.
Change Design:
case 1:
upgrade FW from old style
-
trust
-
domain to new style
-
trust
-
domain. If trust
domain is not empty in old FW, we should auto enable trust do
main of all services in new
FW
.
case 2:
upgrade FW from new style
-
trust
-
domain without auto mapping setup mechanism
to new style
-
trust
-
domain with auto mapping setup mechanism, we should keep original
setup
.
5. [Trust Domain]
Change trust domain to support fo
r supervisor only.
6. [Concurrent WAN]
Support ConCurrent WAN feature in Broadband > WAN interface
Edit
.
Follow
the
lantiq
th
e default broadband interface need apply as default gateway.


[BUG FIX]


1. [TR069]
InternetGatewayDevice.UploadDiagnostics.X_5067
F0_Throug
hput is not
calculated
.
2. [WAN][ITS#
140400586
] Can
’
t setup MTU size to 1500 for PPPoA WAN.
Condition: 1. Create a PPPoA WAN and setup the MTU size to 1500
2. Edit WAN configuration and find the MTU size recover to 1492.
3. [Time][SPRID#
140604120
]
DUT
Current Time didn't correct on (GMT+03:30)Tehran
Time Zone
.
4. [SNMP][SPRID#
140603048
]
Description: The SNMP can't connect after DUT reboot
Condition:
1. Enabled the SNMP from DUT GUI
2. SNMP browser can connect to SNMP of DUT
3. DUT reboot
4. The SNMP can't connect after DUT reboot
5. You need disable and enable the SNMP of DUT again
5. [
TR069
]
If prefix not change, without send WAN_CONNECTION_UP event to smd
.
6. [TR069]
When the connReqPath is NULL,tr69 will crash
.
7. [Interface G
roup]
I
f there are multiple WANs, one is default WAN, the other WAN is
bounded with an interface group at br1, br1 is dynamic interface group with critiria of
opt60. When
default WAN is in bridged mode, and interface grouped WAN is routing
mode, interface
group is failed to bind its LAN PC.
8. [CLI]
Can
not
add an ETHWAN interface from command line
.
9. [SNMP]
[SPRID#
140603049
]
The WanIP of SNMP get value=0 on PPPoE WAN
.
Condition
:
1. DUT was PPPoE WAN
2. The WanIP(OID 1.3.6.1.4.1.890.1.2.2.3) of SNMP get
value=0
3. The IPoE WAN didn't have this issue



10. [SNMP][SPRID#
140603051
]
The LoginPasswd of SNMP can't set value lower than 6
characters
Condition:
1. DUT was PPPoE WAN
2. The LoginPasswd(OID 1.3.6.1.4.1.890.1.2.2.6) of SNMP can set value=
123456 successfully
3. The LoginPasswd(OID 1.3.6.1.4.1.890.1.2.2.6) of SNMP can't set value=
12345 successfully
11. [SNMP][SPRID# ]
The PPPoEusername and PPPoEpasswd of SNMP can't set value on
PPPoE WAN
Condition:
1. DUT was PPPoE WAN
2. The
PPPoEusername(OID 1.3.6.1.4.1.890.1.2.2.4) and PPPoEpasswd(OID
1.3.6.1.4.1.890.1.2.2.5) of SNMP can't set value on PPPoE WAN
12. [Wireless]
MAC Filter doesn't work on WLAN clients with "WPA
-
PSK" and
"WPA2
-
PSK" security mode.
Symptom:
1. Enable MAC Filter, cli
ck Allow and add the MAC address of the WLAN clients.
2. When wireless security mode configures as "WPA
-
PSK" or "WPA2
-
PSK", WLAN
clients can’t associate with DUT.
13. [GUI][SPVD# 94]
Need to change the name of original "More AP" to "Guest/More AP".
14. [MAC Filter
][SPVD#63] When "Host name" set special characters of MAC Filter rule,
the rule will show error result.
Condition:
1. Go to "Security > MAC Filter" webpage, set rule1 as "Allow/ Host Name=!@#$%/
MAC Address=11:22:33:44:55:66", click Apply button.
2. Check
this MAC Filter rule status.
3. You can see the rule1 shows "Host name=!" and rule2 shows "Allow/ Host
Name=#$%/ MAC Address=11:22:33:44:55:66".
15. [Static DHCP]
[SPVD NO:74] End
-
user can configure duplicated MAC address for static
DHCP rule if STB Vendor ID
is configured first
Condition:
1. Configure Vendor ID as MSFT_IPTV in STB Vendor ID.
2. LAN client (10:78:D2:7A:EE:3B) with Vendor ID MSFT_IPTV gets IP successfully
(192.168.1.3) and add this client into static DHCP automatically.
3. Try to add new static
DHCP for same client (10:78:D2:7A:EE:3B) with different IP
address (192.168.1.33), click Apply button. DUT can save the configuration.
16. [Port Trigger]
[SPVD#49]Add Port Trigger protocol as "TCP" but WebGUI will change



to "TCP/UDP".
Condition:
1. Add Port Tr
igger rule and configure protocol as "TCP", click Apply button.
2. Re
-
check the rule, you can see the protocol has been changed to "TCP/UDP"
automatically.
17. [System Monitor]
[SPVD NO:48] The Refresh Interval of "System Monitor > Traffic
Status > NAT" webpage
doesn't work.
18. [TR069]
[ITS#
140600842
]
TR69 authenticate issue.
Condition: So far our CPE would reply inform after every 401 challenge, to customer's
point of view, this session has been break up and initial a new session, this is not
customer want. Custo
mer want this behavior as answer the last reply, to make the session
continue. (any SERVER request
-
> CPE reply) * n
-
> SERVER send 401
-
> CPE last
reply with authentication ))
19. [TR69c][ITS# 140600842]
cannot finish GPN and GPV of IGD. with AVSystem ACS
ser
ver
20. [ARP][SPVD# 44] Wrong display of ARP interface for new interface group in "ARP
table" webpage.
21. [WDS][SPVD# 37]
WDS will add "2.4GHz" wording on title when user click "Cancel"
button
.
22. [GUI][SPVD# 164] Web GUI IOP issue with IE.
Condition:
1. Go to "Sec
urity > MAC Filter" webpage, enable MAC Address Filter, MAC Restrict
Mode configure as Allow.
2. Add MAC Filter rule, and click Apply button.
3. You can see the MAC Restrict Mode button is disappearing. (See attachment)
23. [TR069]
TR69 GPV of IGD
.
fail.
Condi
tion:
1. doing GPV of wrong parameter, tr69c won't return error code but tr69c dead instead.
2. get GPV of IG
D. fail. (the reason is as 1.)
24. [MAC Filter][SPVD# 58]
MAC Filter could not delete total item.
Condition:
1. At Security > MAC Filter page, ad
d a rule (Host name:host1, MAC=11:11:11:11:11:11).
2. If you clear all data of MAC Filter, DUT will pop
-
up error message:"MAC address is
invalid".
25. [WPS][ITS# 140600335] WPS LED become in progress but we don't push the WPS
button



26. [GUI][ITS#
140700502
]
web p
age redirect to an unknown web page error 400
.
Condition: The unit shows a blue 400 error screen when they try to re
-
login to the devices
27. [Port Forwarding][SPVD# 95]
Add Port Forwarding rule, the WAN IP is empty at first
time.
Condition:
1. At "NAT > Port
Forwarding" webpage, add a rule.
2. Enter WAN IP and press Apply, you can see the WAN IP still empty. =
3. Modify the rule to enter WAN IP, it will work well.
28. [Wireless]
Can’t add wireless MAC Authentication rules for Guest/More AP.
Condition:
1. Go to
"Wireless > MAC Authentication" webpage, add new MAC address for
Guest/More AP. Click OK button, but rule can’t be added.
2. If repeat step1 for 4~5 times, DUT will crash. Need to do H/W reset to default, and
DUT can work well again.
29. [Scheduler][SPVD# 54]
The link of Add or modify Scheduler Rules can't work
.
30. [WAN]
ADSL WAN with VLAN setting can't be configured successfully on the first time.
Condition:
1. Create an ATM WAN rule as VPI/VCI: 0/33, 802.1p/802.1q: 0/201, and click Apply
button.
2. But you can
see 802.1p/802.1q is configured as "0/0".
3. Edit this rule, configure 802.1p/802.1q as 0/201 again, click Apply button.
4. DUT can save correct configuration successfully.
31. [Wireless][SPVD# 35]
[SPRID#
130812632
]
The More AP doesn’t disable when end
-
user
di
sable Wireless LAN.
32. [Port Forwarding][SPVD# 43]
[SPRID#
131024444
]
If Remote MGMT WAN port is used,
Port Forwarding rule can be added with same port.
33. Auto Switch Off can't work on all LAN port, wirless and Ethernet WAN.
Condition:
1. Go to "Security > Sch
eduler Rules" page, add a Schedule rule(Everyday, 13:00
-
17:00)
2. Go to "Nerwork Setting > Power Management > Auto Switch Off" page.
3. To mark any LAN port/wireless, re
-
check all LAN port/wireless still work well.
4. At Ethernet mode, to set Ethernet WAN
off, but it still work.
34. [Trust Domain][SPVD# 39]
The function of Trust Domain will be disabled when end
-
user
re
-
add or delete the IP address from Trust Domain List.
Condition:
1. Add an IP address in Trust Domain List.



2. Enable Remote MGMT Trust Domain se
rvice, and click Apply button.
3. Re
-
add/delete IP address in Trust Domain List, and click Apply button.
4. Then the Remote MGMT Trust Domain service will be disabled automatically.
35. [System][SPVD# 12]
DUT will reboot automatically when upload system config
uration
by an incorrect file.
36. [System]
[SPVD
#
57] DUT will reboot automatically when upload firmware/system
configuration by an incorrect file(less 30MByte).
Condition:
1. Go to "Maintenance > Firmware Upgrade" webpage, upload firmware/system
configuration
by an incorrect file(more than 30MByte).
2. Webpage will keep loading and DUT will reboot automatically.
37. [Bridge][SPVD# 21]
[SPRID#
140526418
]
DUT bridge mode can't work well after
rebooting.
38. [DNS Route]
DNS Route rule display error and can not delete the
rule with special
character.
Condition:
1. Go to "DNS Route" webpage, add a new rule with "//" or "/" character (ex:
http://www.google.com.tw), click OK button.
2. You can see the rule display "Domain Name=http:", "Subnet
Mask=www.google.com.tw".
3. And t
hen delete rule, it will pop
-
up error message: "Delete DNS Route entry for
domain=http: failed". (See attachment)
4. LAN PC surf Internet fail after cleaning browser cookie and flush DNS.
39. [3G WAN][ITS#
140500039
]
PPP 3G don
gle always red line
.
40. [3G WAN][IT
S#
140500039
]
3G text will disappear.
41. [File Sharing][SPVD# 129]
The "Share Directory List" field can't display properly.
Condition:
1. Enable File Sharing Services.
2. Add new share folder, manually type in the location of the share with long string, click
Apply button.
3. You can see the typo overlap.
42. [PPTP][SPRID#
140625439
]
PPTP VPN Policy Route can only select All interfaces.
Condition:
1. Enable PPTP.
2. Set Policy Route on LAN1, then Click "Apply" button failed.
3. Policy Route can only select All int
erfaces.



43. [SNMP][SPVD# 14]
SNMP can't set parameters from MIB Browser.
Condition:
1. Connect to SNMP server (MIB Browser).
2. Set value on System Name, System Location, System Contact...etc.
3. Server will display "SNMP request time out".
4. And the "Syste
m Contact" has the word limit in WebGUI.
44. [TR069]
HTTPS firmware download failed
.
Condition:
1. HTTPS with auth
-
https link with ACS server and connected with username/password
2. HTTPS without auth
-
https link with ACS server and connected without
user
name/password
45. [Port Forwarding][ITS#
140500039
]
set port forwarding
fail.
Condition:
1.
With default setting, GUI
>
Maintenance
>
remote
mgmt
>
Change http port from 80 to
81 (port 80 should available now)
2.
Log in with 192.168.1.1:81
3.
GUI. Network Set
ting
>
NAT
>
add port forward 80 to LAN address 192.168.1.50,
GUI pops up an alert message.
46. [DNS Entry][SPRID#
140716393
]
DNS Entry cannot work
.
C
ondition:
1. Restoredefault.
2. Connect DUT to Ethernet IPoE.
3. Creat DNS Entry rule (Hostname = aaa / IPv4
Address :8.8.8.8)
4. But ping aaa is failed.
47. [TR069]
when set schedule inform via ACS server, tr69c will crash
.
48. [
ITS
#
140701449]There are twice iptables for ISAKMP (udp destination port 500)in
FW_GENERAL_INPUT chain
49. [ITS
#
140701450]Port 30005 for TR069 Con
nection REQ should only be open when
periodical inform is enabled
.
50. [GUI][SPVID# 106]
The tab button display fail on IE11
.
51. [File Sharing]
[
SPRID :131022269]
Set USB service to public can't work issue.
Condition:
1. Plug USB flash
2. Set USB Service
-
> Acces
s Level to Public, then apply.
3. Use LAN client to access USB, but it can't access well.
4. Modify Share Directory List, it's not the same value we set.



5. Access Level can't set to Public.
52. [Static DHCP]
User cannot delete IPv6 static route rule.
C
onditi
on:
1. Restoredefault.
2. Add one static route rule with Route Name=TEST / IP Type=IPv6 / Destination IP
Address=111:222:333::111 / Prefix Length=64 / Use Gateway IP Address=Disable / Use
Interface=Default/br0, click "OK".
3. Creat
e
IPv6 static route rule
is success.
4. But user cannot delete this rule.
53. [
Mac filter
]
Mac filter title doesn't match Mac restrict mode
.
Condition:
1. Security
-
> Mac Filter
2. See attach picture, hope title can match with Mac restrict mode.
54. After delete Interface Group rule, LAN
clients can't access GUI.
Condition:
1. Set DUT on ADSL PPPoE mode.(Internet WAN interface)
2. Enable VoIP WAN ineterface.
3. Add New Interface Group rule,
-
Group Name: test
-
WAN Interfaces used in the grouping: VoIP/atm1.1
-
Grouped LAN int
erfaces: LAN1
4. Delete Interface Group rule(test).
5. LAN clients can't access GUI.
6. Console display "unregister_netdevice: waiting for br1 to become free. Usage count =
1"
55. [TR069][SPRID#
131106348
]
GetParameterValues InternetGatewayDevice. issue.
56. [WAN][
ITS#
140400586
]
support config mtu size range to 68
-
1500 for PPPoA
.
57. [Wizzard][SPVD# 56] Wizard DNS static IP address doesn't match with broadband DNS
static IP address.
Condition:
1. By default, manually configure static DNS IP address via Wizard.
2. Go to
"Broadband" webpage, you can see the static DNS server field is empty.
58. [LogSetting][SPVD# 60]When Log setting of "Active log" and Alert select some
category with "IGMP/ QoS/ UPnP/ ...", but "System Monitor > Log" doesn't show these
information.
Condition:



1. By default, configure WAN type as IPoE.
2. Go to "Maintenance > Log Setting" webpage, enable "Syslog Logging" and select all
category, click Apply button.
3. LAN PC use VLC to play IPTV, SuperGen to test QoS, and add UPnP rule via Win7.
4. Go to "Syste
m Monitor > Log" webpage, select Level=Debugging/ Category= All.
5. But Log can't show about logs of "IGMP/ QoS/ UPnP/ ...".
59. [Wizard]
Quick Start Wizard can't save configure after CPE reboot
.


Hab auch nen Scan auf denn Ports von früher gemacht und jetzt ist würklich dicht da^^ Hoffe das jetzt keine Probleme macht und auch andere keine Macken hat, eigentlich nicht wenn die so viel gefixt haben. sieht echt gut aus. Also wenn ihr welche auszüge braucht, sagt bescheid und danke für eure Hilfe!

MfG Dirty Dozi
Dirty Dozi
Neu im Board
Neu im Board
 
Beiträge: 18
Registriert: Mi 23 Jul, 2014 10:24
Wohnort: Area 52, Location Top Secret

Vorherige

Zurück zu ADSL & xDSL

Wer ist online?

Mitglieder in diesem Forum: Bing [Bot] und 53 Gäste