auf eigene gefahr! die ini ist selbstgebastelt und sicher noch fehlerhaft.
vor dem hochladen
1. ein backup der vorhandenen user.ini machen
2. die test.ini durchlesen!
3. mit einem editor die zugangsdaten einsetzen und 10.7.0.0 und 10.7.0.1 durch die eigenen netz-id und gateway ersetzen.
4. nach [ endofarch ] muss eine leerzeile sein.
5. beim hochladen erscheint eine warnung wegen eines falschen wan-interfaces. (ich weiss noch nicht, woran das liegt, ev daran, dass pppoe im original-template nicht vorgesehen ist.)
6. das st 510 ist nach dem hochladen der .ini nicht mehr unter 10.0.0.138 erreichbar, sondern unter der vorher eingetragenen gateway adresse!
7. nach dem hochladen funktioniert die verbindung zunaechst noch *nicht*. man muss 2 zeilen ueber telnet einfuegen:
pppoe ifconfig intf = pppoe_PPPoE user = DEINUSERNAME@home password = DEINPASSWORT
pppoe ifattach intf = pppoe_PPPoE
8. wer beim durchlesen der .ini nur bahnhof versteht, bitte die finger davon lassen! das zurueckstellen des st 510 auf die original user.ini wird schwierig/unmoeglich, wenn man sich beim aendern der lan ip adresse vertan hat.
wenn man sich beim eintippen vertan hat, kann man den befehl mit Strg+C abbrechen. bei laengeren befehlszeilen bewaehrt es sich, sie in einem editor zu schreiben und dann ins telnet-if zu pasten.
- Code: Alles auswählen
[ language.ini ]
config language=de
[ script.ini ]
add name=autopvc_add_qos index=0 command="qosbook add name _auto_$1_$2 class $3 tx_peakrate $4 tx_sustrate $5 tx_maxburst $6 rx_peakrate $4 rx_sustrate $5 rx_maxburst $6 dynamic yes"
add name=autopvc_delete_qos index=0 command="qosbook delete name _auto_$1_$2"
add name=autopvc_add_bridge index=0 command="qosbook add name _auto_$1_$2 class $3 tx_peakrate $4 tx_sustrate $5 tx_maxburst $6 rx_peakrate $4 rx_sustrate $5 rx_maxburst $6 dynamic yes"
add name=autopvc_add_bridge index=1 command="phonebook add name _auto_$1_$2 addr $1.$2 type any dynamic yes"
add name=autopvc_add_bridge index=2 command="bridge ifadd intf _auto_$1_$2 dest _auto_$1_$2"
add name=autopvc_add_bridge index=3 command="bridge ifconfig intf _auto_$1_$2 qos _auto_$1_$2"
add name=autopvc_add_bridge index=4 command="bridge ifattach intf _auto_$1_$2"
add name=autopvc_delete_bridge index=0 command="bridge ifdetach intf _auto_$1_$2"
add name=autopvc_delete_bridge index=1 command="bridge ifdelete intf _auto_$1_$2"
add name=autopvc_delete_bridge index=2 command="phonebook delete name _auto_$1_$2"
add name=autopvc_delete_bridge index=3 command="qosbook delete name _auto_$1_$2"
add name=autopvc_add_pppoerelay index=0 command="qosbook add name _auto_$1_$2 class $3 tx_peakrate $4 tx_sustrate $5 tx_maxburst $6 rx_peakrate $4 rx_sustrate $5 rx_maxburst $6 dynamic yes"
add name=autopvc_add_pppoerelay index=1 command="phonebook add name _auto_$1_$2 addr $1.$2 type any dynamic yes"
add name=autopvc_add_pppoerelay index=2 command="ethoa ifadd intf _auto_$1_$2 dest _auto_$1_$2"
add name=autopvc_add_pppoerelay index=3 command="ethoa ifconfig intf _auto_$1_$2 qos _auto_$1_$2"
add name=autopvc_add_pppoerelay index=4 command="ethoa ifattach intf _auto_$1_$2"
add name=autopvc_add_pppoerelay index=5 command="ip ifwait intf _auto_$1_$2 timeout 15 adminstatus up"
add name=autopvc_add_pppoerelay index=6 command="pppoe relay add port _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=0 command="pppoe relay delete port _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=1 command="ethoa ifdetach intf _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=2 command="ethoa ifdelete intf _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=3 command="phonebook delete name _auto_$1_$2"
add name=autopvc_delete_pppoerelay index=4 command="qosbook delete name _auto_$1_$2"
add name=autopvc_change_qos index=0 command="$$1 ifdetach intf $2"
add name=autopvc_change_qos index=1 command="$$1 ifconfig intf $2 qos $3"
add name=autopvc_change_qos index=2 command="$$1 ifattach intf $2"
add name=autopvc_change_qos_pppoerelay index=0 command="ethoa ifdetach intf $1"
add name=autopvc_change_qos_pppoerelay index=1 command="ethoa ifconfig intf $1 qos $2"
add name=autopvc_change_qos_pppoerelay index=2 command="ethoa ifattach intf $1"
add name=autopvc_change_qos_pppoerelay index=3 command="pppoe relay add port $1"
add name=autopvc_change_qos_pppoeethoa index=0 command="ethoa ifdetach intf $1"
add name=autopvc_change_qos_pppoeethoa index=1 command="ethoa ifconfig intf $1 qos $2"
add name=autopvc_change_qos_pppoeethoa index=2 command="ethoa ifattach intf $1"
add name=autopvc_change_qos_pppoeethoa index=3 command="pppoe ifattach intf $3"
add name=autopvc_change_qos_pppoa index=0 command="pppoa ifdetach intf $1"
add name=autopvc_change_qos_pppoa index=1 command="ip ifwait intf $1 timeout 5 adminstatus down"
add name=autopvc_change_qos_pppoa index=2 command="pppoa ifconfig intf $1 qos $2"
add name=autopvc_change_qos_pppoa index=3 command="pppoa ifattach intf $1"
[ env.ini ]
set var=CONF_REGION value=Oesterreich
set var=CONF_PROVIDER value=Inode
set var=CONF_DESCRIPTION value="NAT Router w/ PPPoE"
set var=CONF_SERVICE value="PPPoE NAT"
set var=CONF_DATE value="An der Konfiguration wurden manuell Ă„nderungen vorgenommen."
set var=CONF_VERSION value=3.7.2.3
set var=HOST_SETUP value=auto
set var=PPPoE_userid value=USERNAME@home
set var=PPPoE_passwrd value=PASSWORT
set var=pridns value=195.58.160.194
set var=CONF_TPVERSION value=1.2.0
set var=COLUMNS value=80
set var=ROWS value=24
set var=SESSIONTIMEOUT value=600
[ wizard.ini ]
config allow_factory_tpl=no trace=yes autopopup=no
[ snmp.ini ]
[ phone.ini ]
add name=PPPoE addr=9*35 type=ethoa
add name=voip addr=9*36 type=ethoa
[ ipqos.ini ]
config dest=PPPoE
config dest=voip
queue config dest=PPPoE queue=0
queue config dest=PPPoE queue=1
queue config dest=PPPoE queue=2
queue config dest=PPPoE queue=3
queue config dest=voip queue=0
queue config dest=voip queue=1
queue config dest=voip queue=2
queue config dest=voip queue=3
[ qos.ini ]
config format=bytes
add name=default class=ubr
[ oam.ini ]
config clp=1 loopbackid=6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a
mode port=dsl0 blocking=enabled
mode port=dsl1 blocking=enabled
mode port=atm2 blocking=enabled
mode port=atm3 blocking=enabled
mode port=aal5 blocking=enabled
mode port=atm5 blocking=enabled
[ pfirewall.ini ]
chain create chain=source
chain create chain=sink
chain create chain=forward
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=udp dstport=dns action=accept
rule create chain=source index=2 prot=udp dstport=bootps action=accept
rule create chain=source index=3 action=drop
rule create chain=sink index=0 srcintf=eth0 prot=udp dstport=tftp action=drop
rule create chain=sink index=1 srcintfgrp=!wan action=accept
rule create chain=sink index=2 prot=udp dstport=dns action=accept
rule create chain=sink index=3 prot=udp dstport=bootpc action=accept
rule create chain=sink index=4 action=drop
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
assign hook=sink chain=sink
assign hook=forward chain=forward
assign hook=source chain=source
[ label.ini ]
add name=BestEffort
add name=HighPriority
add name=MediumPriority
add name=RealTime
config name=BestEffort classification=increase defclass=4 ackclass=4
config name=HighPriority classification=increase defclass=10 ackclass=10
config name=MediumPriority classification=increase defclass=6 ackclass=6
config name=RealTime classification=increase defclass=14 ackclass=14
chain create chain=user_labels
[ bridge.ini ]
ifadd intf=voip dest=voip
ifconfig intf=voip
ifattach intf=voip
config age=300 filter=no_WAN_broadcast
[ pptp.ini ]
[ ethoa.ini ]
ifadd intf=ethoa_PPPoE dest=PPPoE
ifconfig intf=ethoa_PPPoE
ifattach intf=ethoa_PPPoE
[ ipoa.ini ]
[ cip.ini ]
[ pppoerelay.ini ]
add port=eth0
[ dhcp.ini ]
config autodhcp=off scantime=0 state=enabled trace=off
policy verifyfirst=on trustclient=off
pool add name=LAN_private
pool config name=LAN_private intf=eth0 leasetime=7200
[ pppoa.ini ]
[ pppoe.ini ]
ifadd intf=pppoe_PPPoE
ifconfig intf=pppoe_PPPoE dest=ethoa_PPPoE accomp=on dnsmetric=0 addrtrans=pat
[ ip.ini ]
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=256 defragmode=nat addrcheck=static mssclamping=on
apadd addr=10.7.0.1/16 intf=eth0 addroute=no
ifconfig intf=loop mtu=1500 group=local linksensing=off
ifconfig intf=eth0 mtu=1500 group=lan linksensing=off
ifconfig intf=ethoa_PPPoE mtu=1500 group=wan linksensing=off
ifconfig intf=pppoe_PPPoE mtu=1492 group=wan linksensing=off
rtadd dst=10.7.0.0/16 gateway=10.7.0.1 metric=1
rtadd dst=0.0.0.0/0 intf=pppoe_PPPoE metric=1
[ autoip.ini ]
[ eth.ini ]
ifconfig intf=1 type=auto
config intf=1 state=enabled
[ diagnostics.ini ]
config pingtimeout=1000 pingpacketsize=20
[ dnsc.ini ]
config qrytout=5 interval=10 qryretry=3 attempt=-1 search=on connection=permanent
add addr=127.0.0.1 port=53
[ dnsd.ini ]
domain domain=LAN
add hostname=SpeedTouch
start
troff
[ dhcr.ini ]
ifconfig intf=eth0 relay=on
add addr=127.0.0.1 intf=eth0
[ dhcc.ini ]
config trace=off
[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=14 trace=on modemoption=10000000000000000000000000000000
[ nat.ini ]
[ autopvc.ini ]
config mode=active type=bridge opmode=partial overwrite=disabled peakrate=0
[ system.ini ]
config upnp=disabled mdap=enabled drst=disabled
[ upnp.ini ]
config maxage=1800 defcservice=DIALUP_PPP1 writemode=full safenat=enabled
[ endofarch ]
comments und verbesserungsvorschlaege welcome
